Large-scale Fluid Storage for Australia's Mining Industry

Engineered, modular and relocatable storage solutions for Mine-Affected Water (MAW) across the mine lifecycle, from planning and construction through operations, rehabilitation and closure.

15+
YEARS OF CONTAINMENT EXPERIENCE

400+
CONCEPT TANKS INSTALLED ACROSS AUSTRALIA AND NORTH AMERICA

105
MILLION TONNES OF EARTHWORKS PREVENTED

Built for Complex Mine Water Requirements

Mine-affected water volumes and characteristics change constantly. Rainfall, groundwater inflows, process water demand, treatment capacity, and mine planning all influence your storage requirements, and those requirements are rarely static. 

Concept Tanks combines engineered containment with modular tanks that adapt as your site changes. That helps you manage mine-affected water and stay flexible. 

What mine operators
are facing 

01 1

Variable water volumes

A single wet season can fill storage within weeks, while an extended dry season can evaporate water needed for dust suppression. Concept Tanks modular tank farms scale up or down as the site water balance shifts. A Concept Engineered Floating Cover (EFC) excludes rainfall and reduces evaporation to hold storage at operating levels.

02

Water chemistry and containment risk

Mine-affected water chemistry varies from pit to pit, so a generic liner specification carries risk. Concept Tanks selects each liner system against the site's measured water chemistry. An integrated Leak Detection System (LDS) identifies a compromised liner before fluid reaches grade, with optional remote telemetry for storage located away from regular site inspection.

03

Regulatory and environmental requirements

Approval conditions are site-specific and require demonstrated compliance. Concept Tanks' in-house engineers design each above-ground storage system to those conditions, with full quality assurance and quality control (QA/QC) across manufacture, installation and commissioning providing the compliance record.

04

Integration with mine water infrastructure

Storage is one component of the mine water circuit. Concept Tanks configures inlets, outlets and pipework to connect directly with treatment, transfer, reuse and controlled-discharge systems, avoiding retrofitted connections.

05

Storage across the mine lifecycle

Mine plans change: pits shift, new stages open, and storage built for year three is in the wrong location by year eight. The Concept Tank™ can be relocated, resized or repurposed as operations change, and the Concept AST™ deploys rapidly for emergency storage. 

06

Dam remediation at closure

An earthen dam holding mine-affected water becomes a closure liability, with provisions required from day one for contaminated sediment, reshaping and rehabilitation. 

A Concept Tank™ installs with minimal civil works and no concrete pad, and at closure is drained, dismantled and relocated to the next site, significantly reducing remediation scope. 

07

Pit dewatering storage

Pit lakes accumulate from rainfall and groundwater inflow, and must be dewatered to resume mining or to access a pit at closure. Dewatering produces large volumes over short periods, often carrying suspended solids, dissolved metals or low pH.

Concept Tanks provides rapidly deployable, high-volume storage for this water, with liner systems selected against the pit water chemistry. Modular tank farms can also scale to the dewatering program and be relocated upon completion. Assets ready to be reused for future applications or other sites.

Water we store for mining applications

Mining application projects generate a range of fluids, each with specific storage requirements. Concept Tanks supports eight core fluid types

Mine-affected water (MAW)

Mine-affected water can originate from many sources including pits, rainfall and groundwater inflows. Its chemistry varies from pit to pit, so Concept Tanks selects the liner against each site's water.

Dust suppression water

Dust suppression water is held through the dry season, with an Engineered Floating Cover reducing evaporation. 

Potable water

Potable water for remote sites and camps is stored with a liner rated for drinking water contact. 

Process water

Buffered process water storage maintains site operations through fluctuations in supply and demand. 

Tailings decant water

Water drawn down from tailings storage facilities is stored to restore freeboard and reduce loading on the facility. 

Raffinate

Raffinate, the acidic liquor from hydrometallurgical processing, is stored with a liner system specified to its chemistry. 

Raw water

Raw water is held ahead of treatment, with a cover option to exclude algae and sediment. 

Emergency mine water storage

Following wet-weather events or infrastructure failure, a Concept AST™ installs in 1 to 6 days once the pad is prepared.

Mining 02

Systems and add-ons at a glance 

Here's a quick comparison of the system types and add-ons referenced above. Use it to match the right configuration to your fluid and site requirements: 

Capacity 1ML – 78ML 12ML – 70ML 0.6ML – 14.5ML
Best For Large, regulated storage that may grow, shrink or move  Permanent, high-capacity storage on a tight footprint  Short- to medium-term, emergency and rental storage 

Add-Ons

EFC

Engineered Floating Cover

Engineered geosynthetic barrier used to prevent ingress of rain, cross contamination and prevent evaporation. We engineer and configure covers to your need to prevent excess generation and/or evaporation.

Download Technical Data Sheet ↗

LDS

Leak Detection System

Monitors the interstitial void between primary and secondary liners, giving early warning of a potential primary-liner breach. Powered using a solar battery backup or mains power connection, our LDS services any site no matter how remote.

Download Technical Data Sheet ↗

MONITORING

Remote Monitoring

Remote monitoring connects the system and LDS to your site supervisory control and data acquisition (SCADA) system or telemetry for remote visibility and alarm response.

PIPEWORK

Custom Pipework

Connecting the storage solution to your infrastructure pipework is configured to your needs, including under, over, or through wall penetrations, as well as flanges, valves and vortex breakers.

Proven performance

From remote mine sites to complex operating environments, Concept Tanks delivers dependable fluid storage built for the demands of mining. Our modular systems provide fast installation, minimal earthworks and flexible storage for process water, dust suppression, stormwater, dewatering and wastewater applications.
Concept Tank™ with an Engineered Floating Cover in the Pilbara

Pilbara Dust Suppression Storage

The Pilbara presented a relentless construction environment: mini-tornado whirlwinds, oppressive heat, strong winds, cyclone alerts, and high-UV exposure throughout the program. Iron ore dust, nicknamed the "Pilbara Fog", blanketed the zone continuously, intensified...

read more
2 8.5ML Concept Tanks™ storing overland flow of an industrial site.

Queensland Industrial Stormwater Storage

Our heavy industrial customer needed containment for potential overland flow and stormwater, which increased the risk of containment failure because of its proximity to waterways and port facilities. The unlined dam risked seepage and lacked surge capacity during high...

read more

Frequently asked
questions

Common questions about the Concept Tank, Utility Tank, and Concept AST range. 

Can tank storage replace a mine water dam?

Yes. A Concept Tank™ goes in with minimal civil works and no concrete pad, and holds mine-affected water above ground with a liner tailored to your water chemistry and a Leak Detection System as standard. 

What happens to the system at mine closure? 

We drain and dismantle it. You can move the system to the next site or project, with little to no remediation left behind. 

Can storage expand quickly in a wet season?

Modular tank farms scale up as your water balance shifts, and a Concept AST™ can be deployed rapidly for emergency storage, installed in 1–6 days after site preparation. 

Can the tanks connect to our mine water circuit?

Yes. We configure the inlets, outlets and pipework to connect with your treatment, transfer, reuse and controlled-discharge systems. 

Can we monitor a remote system?

Every system has a Leak Detection System as standard. Optional remote monitoring links the system and LDS to your site SCADA or telemetry. 

Need a mine water storage solution?

Every mining and critical minerals project has different storage requirements. We can help determine the appropriate system, liner and ancillary configuration for your project.