Low-footprint Australian Utility Fluid Storage
Engineered, high-capacity water storage designed around your site, including high-wall, low-footprint configurations for potable, raw, treated, recycled and emergency water applications.
15+
YEARS OF CONTAINMENT EXPERIENCE
400+
CONCEPT TANKS INSTALLED ACROSS AUSTRALIA AND NORTH AMERICA
12+
BILLION LITRES STORED
Built for Water & Utilities
Infrastracture
Utilities move water through capture, treatment, distribution and recycled-water schemes. They balance storage against controlled releases to the environment. We build storage around your capacity, footprint, water quality and asset life.
For potable and treated-water applications, storage must protect water quality and deliver auditable performance. Utility programs may also require compact footprints, long design life, efficient delivery, and infrastructure that remains maintainable throughout its operating life.
What the Australian utility
industry is facing
Potable water quality and containment
Treated water quality degrades in open storage through bird, dust and algal contamination. Concept Tanks engineers the structure, liner system and site integration as a single covered system (AS/NZS 4020 compliant), protecting water quality between treatment and distribution and supporting drinking water compliance.
Covered reservoir integrity
Column-supported reservoir roofs require a liner penetration, or boot, at every column, and each boot is a potential leak path. A Concept Tanks Engineered Floating Cover requires no columns and no liner penetrations. It excludes rainfall, reduces evaporation and significantly reduces inspection and maintenance scope.
High-capacity storage on constrained sites
Utility sites are often constrained by existing plant, roads or housing. Where lateral expansion is not possible, the Concept Tanks high-wall configuration uses precast panels with internal tensioning to increase storage capacity within a compact footprint.
Program certainty and approvals
Large civil builds carry weather and ground risk, and program delays on utility projects have significant downstream impacts. Off-site precasting of wall panels reduces site complexity and construction time, and produces the documentation trail required for approvals and audits.
Long-life infrastructure
Utility assets are planned over decades. Concept Tanks permanent storage structures can be designed for a service life of up to 100 years, with access provisions and a liner that can be repaired or replaced over the asset life.
Typical utility applications
Concept Tanks storage solutions can support a wide range of water and utility applications, including:
- Potable water
- Potable bypass and network intervention storage, keeping supply running during reservoir or network works
- Raw water and pre-treatment buffering
- Intermediate and clear-water storage aligned to project drinking-water requirements
- Recycled-water balancing and controlled release
- Storm and emergency surge storage
- Reservoir by-wash and contingency storage

Systems and add-ons at a glance
Here's a quick comparison of the system types and add-ons referenced above. Use it to match the right configuration to your fluid and site requirements:
|
Concept Tank™
Explore the Concept Tank™ ↗ |
Concept Utility Tank™
Explore the Concept Utility Tank™↗ |
Concept AST™
Explore the Concept AST↗ |
|
| Capacity | 1ML – 78ML | 12ML – 70ML | 0.6ML – 14.5ML |
| Best For | Large, regulated storage that may grow, shrink or move | Permanent, high-capacity storage on a tight footprint | Short- to medium-term, emergency and rental storage |
Add-Ons
EFC
Engineered Floating Cover
Engineered geosynthetic barrier used to prevent ingress of rain, cross contamination and prevent evaporation. We engineer and configure covers to your need to prevent excess generation and/or evaporation.
LDS
Leak Detection System
Monitors the interstitial void between primary and secondary liners, giving early warning of a potential primary-liner breach. Powered using a solar battery backup or mains power connection, our LDS services any site no matter how remote.
MONITORING
Remote Monitoring
Remote monitoring connects the system and LDS to your site supervisory control and data acquisition (SCADA) system or telemetry for remote visibility and alarm response.
PIPEWORK
Custom Pipework
Connecting the storage solution to your infrastructure pipework is configured to your needs, including under, over, or through wall penetrations, as well as flanges, valves and vortex breakers.
Proven performance
Customisable geometry, high-wall configurations and post-tensioned precast construction let us shape storage to the site. Leak detection comes as standard, and liner, cover and remote level monitoring options work alongside it. You get containment you can prove, faster delivery and simpler upkeep.
Utility-Grade Government Containment
Remote sites make everything harder, and potable water leaves no margin for error. Our customer, an Australian water utility, needed two large-scale potable water storage systems at a remote site. The usual options didn’t stack up. Traditional storage was expensive...
Frequently asked
questions
Common questions about the Concept Tank, Utility Tank, and Concept AST range.
How long does a Concept Utility Tank™ last?
We can design our permanent tank structures to last up to 100 years. Access provisions are included, with the option of liner replacement and repairs over the life of the asset. We can design our permanent tank structures to last up to 100 years. Access provisions are included, with the option of liner replacement and repairs over the life of the asset.
Can a tank fit on a constrained treatment plant site?
Yes. Our high-wall configuration uses internally tensioned pre-cast panels to fit more storage into a compact footprint, so you build upward when you can’t expand outward.
How do you protect potable water quality in storage?
An Engineered Floating Cover keeps birds, dust, algae and rainfall out, without the columns and liner boots of a roofed reservoir. The liner system is specified for potable water.
How much can a single system store?
A Concept Utility Tank™ holds up to 70ML. For more capacity, multiple systems can be installed on the same site.
Need an Engineered
water storage solution?
Talk to our team about your required capacity, site footprint, water application, design life and broader project requirements. We can help determine the appropriate system, liner, cover and monitoring configuration for your site.


